Matt that looks great. Can't wait to see it painted. May pop around tonight, but I'll be walking as my bearings still haven't arrived aarrrggghhhh
 
looking good mate...iv been thining recently though, how safe is it to have the cage going to sill/sliders rather than the chassis, have you strenghtened it in anyway?..how much tube did you use n the end then
 
Slider are bolted through the sills and have added supports to the out riggers, but on th list of things to do are replace the sills with box section, but the sills are in very good condition and I made the sliders a while back and the slider tubes are also made from cds,

The amount of tube I will have used is around 32meters ��
 
Only just remembered to take some pics of the finished article

FB93B453-A688-4D9D-8698-E3EB974DD5A0-6987-000003CE834736D4_zps73440451.jpg


5C949E16-0B95-4374-843A-D74382251FDB-6987-000003CE873253B8_zps1a03d743.jpg


F8043E0B-3C94-46F2-8751-498591D26FBF-6987-000003CE8B5C8817_zps32ea5988.jpg


C6166801-9937-4179-8352-12B6BD078C3E-6987-000003CE8F2B29D4_zpsaa1aecea.jpg
 

Similar threads