Riggwelter

Active Member
On my Landy Series III, truck cab/pickup, diesel, 1977, I seem to have factory fitted anchorages for harnesses. I am thinking of getting the static lap and diagonal belt thing from Paddocks, but I am not sure they will fit. Please see the images below. From left to right: IMG 0072: The sticker claiming it to be all fitted. IMG 0073: the corner behind the driver, is the threaded hole an anchorage point? IMG 0078: The gusset on the driver's side (yeah, I know it's mucky...). IMG 0081: two pairs of shining screws. Are they there for the buckles, or to keep something else, like the cab, connected to the chassis?


IMG_0072.JPG IMG_0073.JPG IMG_0078.JPG IMG_0081.JPG
 
Thanks! Yes, that's one anchorage point, the bottom one, and that is as far as I could figure out. But I also need the anchorage points for the top and for the stalk, hence the other photos.
 
One threaded hole in narrow tray behind seats.


One threaded hole in triangular corner plate in side well/seat box.
RNB898.jpg

The high one is either in the door pillar or in a strap bracket between door pillar and roof.
beltupbrack.JPG


The stickers are off ebay.

It looks like there is something covering the shallow tray behind the seats. Is it some sort of vinyl. Seems to be on the bulkhead anorl?
 
Took some pics. mine is a '72 and this is how they were when I got it

first pic shows upper mounting point just behind the drivers seat on top of the bulkhead, second pic shows tub side of stalk mounting, stalk is on cab side and bolt goes through the seat bulkhead and becomes the top bolt of the bracket in the tub.

20161108_124855.jpg

20161108_124904.jpg
 
Last edited:
Oh sorry I aint got seat belts. The photos are only off google. I dont want seat belts as they are only for poofs. :p

I never wear em in any car :D have to say in real life the cops don't even notice. funny how in those reality progs they can spot someone without a belt at 400 yds