jonsey1994
New Member
Help! The gear lever on my 2a has snapped clean off right at the base - anyone know what's involved in replacing it?
famersteve
New Member
it really is that easy but be careful the selectors are in the right position before sticking the new one back in. get a screwdriver and put them all level
jonsey1994
New Member
Cheers - thanks for the advice. I wasn't sure whether it could be done from the top of the selector box, i.e. without dropping out the gearbox. It's stuck in first at the moment so I will take care with the selectors as you have advised. Seems easy enough to get hold of a replacement. Thanks again.
