Sad to be doing it but i am now breaking my 300tdi 90. Currently stripped down to rolling chassis. All parts available - including some nice off road extras. Ill make a list but im sure bits will be forgotten so ask if you need anything. If anyone wants to take the lot then make an offer and its yours. Most parts are mint condition. Collection from Huyton or Widnes WA8, can post most parts for £7.50 through work so just ask about that. So...

2 x front seats (half leather from a rover 25 i think, good fit & comfy)
2 x front seats from a fiesta (good fit & comfy - bought to use as rear seats)
seat box
bulkhead
complete dash
mountney 15" steering wheel and boss
raptor dash - new never fitted (inc. switches and 12v sockets)
gauges (have 6 - need to check which ones)
complete 300 tdi engine & gear box (100,000 miles - great runner recent new clutch & water pump)
4" lift suspension kit
propshafts
front axle
rear axle
uprated tarantula trailing arms
front diff guard
rear diff guard
full exhaust
bonnet
left front wing (with chequer plate)
right front wing (with chequer plate)
rear tub & cappings
rear sides with windows
roof with light bar & 4 lights
2 x CB
3 X CB aerials
sony radio & 2 fly speakers (4 if bought with dash)
rear bench seat
front rubber footwell mats
gearbox tunnel mat
bulkhead mat (around fusebox)
winch bumper
winch with wired & wireless remote & fairlead
front grille and surround
windscreen
2 x front doors (very good condition)
2 x front door cards
2 x back doors (one needs a little tlc but good enough - new one bought and not fitted)
2 x front arches
4 x rear arches
front and rear light guards
seat belts
roof rack
shurlock fp15 immobiliser
rear window guards
galvanized rock and tree sliders
steering guard and shackles
snorkle (enters through top of wing)
inner wings
chassis (good condition has had patches to the rear - should be good for a few years)
tow bar
rear step
5 x wheels and tyres (as in pics - greenway ataca sport 235/85R16)
spare wheel carrier
stainless headlight surrounds

also:
hi lift jack (inc. vehicle mounts & leather bag)
waffle boards

And no, I dont know why all the pictures have decided to flip sideways - sorry about that.

Hi how much for the trailing arms, diff guards, a cb aerial, rock sliders and roof rack and steering wheel&boss (is it 36 spline?)as a job lot posted to leeds? Can you upload some pics
Cheers

Dont think i could post the roof rack - its massive and very heavy. I could look into borrowing a van maybe. Ill stick up a few more pictures now.

That would be great if you could fetch it down, what price you after for all items? Cheers

Ive not got any more pictures of the bits you want but i will be round at my in laws (where it is currently stored) on Tuesday night so will upload some then. As for price - no idea (yes, i know that is an annoying answer) so open to offers on everything. If I could ship the rest but not the roof rack would you still be interested?

Yep definitely interested will PM you with some prices

How much for the rover 25 seats and postage to SG17 5TJ also 2 front and 2 rear arches, are they the sprayed black one on the photo (would they fit on 110)

sorry just noticed you have front rubber footwell mats, gearbox tunnel mat, bulkhead mat (around fusebox).. Could you please email me pictures of all the above.

Thanks

Hi There,

Could I have prices on the following:

Front Wings incl. lights if possible, but not essential + inner, outer arches
Engine, Gearbox and Transfer Box Combo
Front Axle incl Diff & Guard
Rear Axle incl Diff & Guard
Front & Rear Light Guards
Bit of bodywork between wings & bonnet latch panel
Dash Panels
Wheel Carrier (if swing-out)
2x Doors (if rust free)
Windscreen (if heated + associated wiring)
Rear bench seats
Bulkhead rubber (if the bit which fills the foot wells to)
Rear Tub
Rear Step (if NAS style)

That's all I can think of atm!

Would all be collected of course.

taazzukcb said:

Hi There,

Could I have prices on the following:

Front Wings incl. lights if possible, but not essential + inner, outer arches
Engine, Gearbox and Transfer Box Combo
Front Axle incl Diff & Guard
Rear Axle incl Diff & Guard
Front & Rear Light Guards
Bit of bodywork between wings & bonnet latch panel
Dash Panels
Wheel Carrier (if swing-out)
2x Doors (if rust free)
Windscreen (if heated + associated wiring)
Rear bench seats
Bulkhead rubber (if the bit which fills the foot wells to)
Rear Tub
Rear Step (if NAS style)

That's all I can think of atm!

Would all be collected of course.

Click to expand...

I've first dibs on diff guards

Yep, thats cool! If anything has been dibbed already, fair play!

Hi how much for the Raptor dash with gauges switches etc only in Liverpool can pick up

Interested in the doors if not already bagged.
Mick

Hi, if it hasn't been dibbed, can I have photos of the steering guard?

And how much for the jack? Provisional dibs

Oh, and is the light bar available?

There are more things I would like, but will see how many are already bought

Edit: have seen the light bar for sale, how much for it?

HIYA.
can i have a price on your bulkhead and wheels please mate, and can you send me a few pic aswell .thanks ian

Cheers Wallace .

Mate how much for the gearbox if you're breaking that? Is it any good? To be fair can't be worse than mine

PM's sent to everyone who expressed interest - sorry if i missed anyone (just get in touch again). Photos of the chassis, suspension, engine and any other parts requested will be taken and uploaded on tuesday night.

thanks for all the interest.
ben

since we are playing dibs

dibs on gauges.. what are they, price?

dibs on snorkel, pics and price

dibs on cb aerial, pics and price

Do you perchance have the horse shoe clip and bolt that holds the speedo cable on the transfer box please

trax said:

since we are playing dibs

dibs on gauges.. what are they, price?

dibs on snorkel, pics and price

dibs on cb aerial, pics and price

Click to expand...

Already dibbed the gauges matey