paulpdh
Active Member
I started with a small selection
Yes im buying so much stuff Currently. But keeping this or will get another. The Money saved not using a garage has paid for the tools...
View attachment 232886
At a guess bottom ball joint and cv boot.
This came in handy
tomcat59alan
Well-Known Member
Isn't the bolt in the wrong way in the ball joint splitter?
Looks it doesn't it.
tomcat59alan
Well-Known Member
You could only get an open ended on. Not to safe thatCertainly does,be a bugger to use like that.
tomcat59alan
Well-Known Member
brianp38dse
Well-Known Member
Looks like if the bolt was the right way it would not be long enough so needs must.
The bolt has a bit on the end
This is blown up from my original pic
dwarfer
Well-Known Member
hi there Mr b.
That is a good use of a bucket, perfect height for heavy calipers. I'm knicking that idea.
And when you've finished you can turn it over and use it to transport all your tools back to the shed
dwarfer
Well-Known Member
Hi there Mr b..
Would you have a link for that ball joint splitter... me likey tools..
Think I would like to have this on stand by
I'll need to dig it out to see which make I bought but these look the same
https://www.machinemart.co.uk/p/draper-n150-expert-ball-joint-separator/
Amazon product
dwarfer
Well-Known Member
thank you Mr B..
I'll dig mine out shortly as not sure if there are different sizes.
Mines not marked up but I think it's a laser and opens to 60mm.
