landowner

Pensioner Pete
Full Member
Bloomin brake light warning flashing now, fluid ok, its a new fault every week ffs,
might trade it in after christmas
 
There are three circuits which would cause the brake warning light to show:-
  1. The handbrake being applied,
  2. The level of the brake fluid being low, but you've checked that
  3. A problem with the braking system which is usually flagged up by the SLABS ECU.
Are all of the lights which should show during the lamp test phase of the start-up lighting correctly or are some missing?
 
There are three circuits which would cause the brake warning light to show:-
  1. The handbrake being applied,
  2. The level of the brake fluid being low, but you've checked that
  3. A problem with the braking system which is usually flagged up by the SLABS ECU.
Are all of the lights which should show during the lamp test phase of the start-up lighting correctly or are some missing?

Thanks for that, I haven't started it since the fault came up, I'll check this morning.
Merry Christmas have a good one :):)
 

Similar threads