C

Collman

Member

• Sep 4, 2023

• #1

The brake warning light on my Defender 90 TD5 dashboard has come on. The fluid level is fine and the brakes appear to be working as normal. When I push the switch on the handbrake lever with my finger the light still stays on. Does anyone know what this could be?

 

Last edited: Sep 4, 2023

L

lynall

Well-Known Member

Full Member

• Sep 4, 2023

• #2

Do you mean brake light as in ones on rear of the car, or brake warning light on the dash?

 

C

Collman

Member

• Sep 4, 2023

• #3

lynall said:

Do you mean brake light as in ones on rear of the car, or brake warning light on the dash?

Click to expand...

Sorry; it’s the warning light on the dash. I have checked that the float in the brake fluid reservoir is moving and cleaned the reservoir connections but the light is still on.

 

H

Hicap phill

Well-Known Member

• Sep 4, 2023

• #4

Could you have low pads?

 

C

Collman

Member

• Sep 4, 2023

• #5

lynall said:

Do you mean brake light as in ones on rear of the car, or brake warning light on the dash?

Click to expand...

Sorry; it’s the dashboard light. I have just checked that the

Hicap phill said:

Could you have low pads?

Click to expand...

I thought that the only things to cause the brake warning light to stay on was either the fluid reservoir being low, a stuck float, or the handbrake lever switch Sticking. Would a 2004 Defender 90 have sensors on the brake discs?

 

L

lynall

Well-Known Member

Full Member

• Sep 4, 2023

• #6

I reckon @HiCap phil is on the right track.

 

H

Hicap phill

Well-Known Member

• Sep 4, 2023

• #7

Collman said:

Sorry; it’s the dashboard light. I have just checked that the

I thought that the only things to cause the brake warning light to stay on was either the fluid reservoir being low, a stuck float, or the handbrake lever switch Sticking. Would a 2004 Defender 90 have sensors on the brake discs?

Click to expand...

Look under the rear axle to see if you have and cables coming out the brake pads.

If none check the fronts.
Some LR have these to warn of low brake pads. Normally if the brake fluid is low the light flickers as the fluid moves around

 

C

Collman

Member

• Sep 4, 2023

• #8

Hicap phill said:

Look under the rear axle to see if you have and cables coming out the brake pads.

If none check the fronts.
Some LR have these to warn of low brake pads. Normally if the brake fluid is low the light flickers as the fluid moves around

Click to expand...

I’ll check them tomorrow. Thanks for that.

 

C

Collman

Member

• Sep 6, 2023

• #9

Problem solved. I had nipped the yellow wire between the hand brake lever and the seat box when I was replacing the hand brake cable, so I cut off the damaged section, connected a new piece of wire and a new blade connector. Job done.