tom.brandford
Member
Hello all,
Trying to chase down some braking issues ahead of the MOT.
When desires the pedal, I get a slight initial braking force (no pedal resistance) that dissipates, with the pedal going to the floor.
If I push hard once it is on the floor it will brake properly, but with little movement of the actual pedal.
I’ve bled the brakes & adjusted the rear drum brakes (1988 110), and installed a new master cylinder.
The weird thing is, even after a full bleed, the pedal still goes to the floor on the first go (albeit with slightly sharper braking force once on the floor). I can ‘pump’ the pedal quickly which gives a nice firm pedal and shortens the travel.
Does anyone have any ideas? Thanks!
Trying to chase down some braking issues ahead of the MOT.
When desires the pedal, I get a slight initial braking force (no pedal resistance) that dissipates, with the pedal going to the floor.
If I push hard once it is on the floor it will brake properly, but with little movement of the actual pedal.
I’ve bled the brakes & adjusted the rear drum brakes (1988 110), and installed a new master cylinder.
The weird thing is, even after a full bleed, the pedal still goes to the floor on the first go (albeit with slightly sharper braking force once on the floor). I can ‘pump’ the pedal quickly which gives a nice firm pedal and shortens the travel.
Does anyone have any ideas? Thanks!
