haigy
Well-Known Member
I had a grinding noise coming from brakes. Fronts were fine.rears were fine but drivers side rear outer pad had fell thru caliper and was rubbing hub hence the grind.
I took pads out and pressed brake to push piston out cleaned and pressed back in did this 3 times.and re fitted with new pads and fitting kit
Pads were tight fit and really struggled to turn hub by hand.wheel back on and could turn it. So 4t id need bed in a bit now 4 days on and the drivers side is getting hot and feels like holding back. Any ideas what i should check 1st as caliper seems ok
Pads were changed both side but only drivers side seems be a problem
I took pads out and pressed brake to push piston out cleaned and pressed back in did this 3 times.and re fitted with new pads and fitting kit
Pads were tight fit and really struggled to turn hub by hand.wheel back on and could turn it. So 4t id need bed in a bit now 4 days on and the drivers side is getting hot and feels like holding back. Any ideas what i should check 1st as caliper seems ok
Pads were changed both side but only drivers side seems be a problem
Last edited: