Hi guys,
Just a quick question, finally got round to bleeding my brakes last night. The rear one bled fine, but when i come to bleed the front, nothing.
I have to a dual master cylinder with a 5 way splitter, 2 inputs from the master cylinder, 2 outputs to the front and 1 to the rear.
I dismantled the pipes to the front to see if any were blocked.
When i disconnected the pipe to the master cylinder, there was no fluid leaking out, even when i pumped the brake pedal.
What could be wrong?? I wouldn't have thought the master cylinder is faulty as its pumping to the rear brakes...
Any ideas welcome..
Just a quick question, finally got round to bleeding my brakes last night. The rear one bled fine, but when i come to bleed the front, nothing.
I have to a dual master cylinder with a 5 way splitter, 2 inputs from the master cylinder, 2 outputs to the front and 1 to the rear.
I dismantled the pipes to the front to see if any were blocked.
When i disconnected the pipe to the master cylinder, there was no fluid leaking out, even when i pumped the brake pedal.
What could be wrong?? I wouldn't have thought the master cylinder is faulty as its pumping to the rear brakes...
Any ideas welcome..