Hi Guys first day on the site been doing the brakes on denis and got bored trying on my own now thought id have a go at the vast knowledge of you other landy owners. Here we go then brake peddal after time goes to the floor with the red light coming on. Before you sat its the master cylinder ive put a new one on then i put new flex pipes then new callipers this was after the obviouse bleeding and replacing shoes and pads . any ideas guys as i dont want to start doing things like the servo or the vacum pump without being sure so if you know a way of testing these can you let me know as i just want to get back to actually using the dam thing. looks like a good site though Helllllpppppp

it can only go to the floor if it losing pressure, which means fluid getting past a seal some where or its full of air.. if there is no sign of fluid at the wheels then it has to be yer master cylinder.

so are you losing fluid? and if yer get someone to pump the pedal while you look in the reservoir do you see bubbles appearing.

and yer wanna stick this in the relevant section

cheers ill have a look in the master cylinder

looked in the master cylinder and no bubles. Not losing fluid anywhere either that i can see or notice in the master cylinder only other place i can think of it getting past seals is the rear cylinders as ive changed the calypers and master cylinder and put about a gallon of fluid in while i was bleading the system about 20 times.