ivancrx

Well-Known Member

• Mar 9, 2015

• #1

Hi

Does any one know if this bracket for the brake hose is available, and if so any idea of a part number (I need both sides). I have spent hours looking at the pats catalogue but can't find it.

Many thanks

Ivan

 

G

gse1986

Active Member

• Mar 9, 2015

• #2

Pretty sure it's part of the chassis.

Since you'd be welding it on, I'd imagine just a piece of metal with a hole would be sufficient? May be wrong, though....

 

Last edited: Mar 9, 2015

Station House

Well-Known Member

• Mar 9, 2015

• #3

Dont think so - shouldnt be too hard to fabricate something to do the job

 

P

Pricilla

Active Member

• Mar 9, 2015

• #4

I'd say it's the chassis....no separate parts on my parts info

Bit of angle and order a few holes and weld it on

 

ivancrx

Well-Known Member

• Mar 9, 2015

• #5

The hose I have is slightly different to this as it is a hole with a flat side on it, I was just looking for an easier option as I am putting discovery front calipers on which have twin hoses on them.

 

Marmaduke

Well-Known Member

• Mar 9, 2015

• #6

ivancrx said:

The hose I have is slightly different to this as it is a hole with a flat side on it, I was just looking for an easier option as I am putting discovery front calipers on which have twin hoses on them.

Click to expand...

How long can you wait as I have a Discovery sat on the drive that's going to the scrapper later this week so I could cut them off theat if they're the ones you want.

I'm only up the road the other side of Swadlinscroat

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Mar 10, 2015

• #7

I made them when I changed from 90 axles to Disco 24 spline ..

 

ivancrx

Well-Known Member

• Mar 10, 2015

• #8

Marmaduke said:

How long can you wait as I have a Discovery sat on the drive that's going to the scrapper later this week so I could cut them off theat if they're the ones you want.

I'm only up the road the other side of Swadlinscroat

Click to expand...

That would be fantastic, I am in no hurry as soon as you have them as it is just one of the many jobs on the list.