Series tree
Member
So after removing and replacing the pads I trimmed down ( doh) I am back to this situation.
All pipes have been replaced, all cylinders. Pads springs and drums. Wheel adjusters are on the lowest setting.
System was bled + new fluid.
Pedal seemed very hard/very little travel. Was binding somewhere as I couldn't push vehicle in neutral
Today I adjusted the master cylinder rod by twisting it, I can now push it in a tiny bit ( this is freeplay correct)?
Pedal now is preety weak, no binding though. What now guys?
All pipes have been replaced, all cylinders. Pads springs and drums. Wheel adjusters are on the lowest setting.
System was bled + new fluid.
Pedal seemed very hard/very little travel. Was binding somewhere as I couldn't push vehicle in neutral
Today I adjusted the master cylinder rod by twisting it, I can now push it in a tiny bit ( this is freeplay correct)?
Pedal now is preety weak, no binding though. What now guys?