@Bradisco re the cage thing, the pictures you posted are not very conclusive but perhaps it uses existing floor pans and cab but it certainly requires it to be heavily chopped and looks like tray backed.
That's a full tray back motor.
Chassis needs to be bare so you can put cage on then sometimes panels affix to it. Ask the supplier questions & they may help.
This is a big job
That's a full tray back motor.
Chassis needs to be bare so you can put cage on then sometimes panels affix to it. Ask the supplier questions & they may help.
This is a big job
Looked at your photos & I see problems. If your building to MSA regulations this cage is not to the standard.
Front hoop can do the following.
1) Go From left to right forming a hoop with 1bend for the windscreen tilt
Or
2) From bulkhead up following the screen line(1bend) then straight bar & attach to rear hoop
This kit has the number 2 style BUT the bars are going to the rear tray back,past the rear hoop.