H

Harry2000

Member

• Sunday at 19:55

• #1

Got a boost controller on my 300tdi wanting to plumb my boost gauge in now but not sure if I should t into either side of the controller pipes or if there’s a better place , the gauge is also very laggy this could be due to the cheap price of it

 

L

lynall

Well-Known Member

Full Member

• Sunday at 21:02

• #2

Manifold side of the controller.

 

D1Nut

Well-Known Member

• Yesterday at 08:48

• #3

Never heard of a boost controller for a 300 tdi

Or I am missing the point ?

 

Phill

Member

• Yesterday at 10:41

• #4

You can fit a boost controller to any TC car.

 

miktdish

Guns n Chainsaws

Full Member

• Yesterday at 11:24

• #5

It's a small bleed-off valve that fits in the pressure line and allows you to set the pressure which activates the wastegate.

Not sure about them.
I think it would be far to easy to set the boost to be damagingly high.

Fourby Turbo Boost Controller 200/300 Tdi Engines

The Fourby Turbo Boost Controller for Land Rover 200/300 Tdi Engines

fourby.co.uk

 

D1Nut

Well-Known Member

• Yesterday at 12:16

• #6

Well I disconnected the standard one on my 300 tdi years ago and get a whopping 1 bar of boost vs the 0.9 to 1.1 bar the manual says is safe