Pikey
Dummy Ejection Facilitator..
don't Think so I pikeied the soundproofing off robinT's 300 bonnet for my 200tdi and it was different. also headlights are different & think the 300's have a small cutaway over the headlamps. & the wings are different as well. So unless someone knows different I'd guess at NO! 
stuart4884
Member
Hi not sure about bonnet but wings are interchangeable
Ive fitted two 200s to my 300 straight swap and bonnets
look same to me Cheers Stuart
Ive fitted two 200s to my 300 straight swap and bonnets
look same to me Cheers Stuart
Pikey
Dummy Ejection Facilitator..
200 & 300 lights are different too.
if ya fit 300 lights to a 200 ya have to change the wings as well. so not sure if the bonnets are different. but given that the wings are, I'm leaning to the conclusion that the bonnets are as well.
Until someone turns up who's swapped the bonnets. I'd say Different.
jamesmartin
Well-Known Member
wings are different thought bonnets where the same
Pikey
Dummy Ejection Facilitator..
Dunno but soundproofing mat int same. half of the holes don't line up for the plastic studs.
northstar555
Member
Rimmers only list one option for a bonnet rather than by chassis number so I reckon they're all the same.
LAND ROVER DISCOVERY 1 BONNET BLACK | eBay
LAND ROVER DISCOVERY 1 BONNET BLACK | eBay
northstar555
Member
Part No.: MWC6702
wiltshire landyman
I’m back
we didnt have to on me mates 200 bit of cutting was required but no body parts were changed
GreenHornet
Well-Known Member
I have a 200 and I have had to put a new front end on it. I had to get new light panels and could only get 300 series panels.
So my 200 has 300 lights, grill and indicators. I have kept the same bonnet and wings.
My mate has a 300 and for when I looked they are using the same wings and bonnet and slam panel. The difference is purely in the front light panels.
The 300 wings do have a small bracket on their leading edge to provide a fixing for the hockey stick trim that fits from the grill to the ursine of the headlight.
