kwondo

Member
Hi to all on this new years eve, could any one please help to identify my missing bolts, as shown where the red arrow is on the photo size or part number, thanks
 

Attachments

  • belly pan.jpg
    belly pan.jpg
    47.8 KB · Views: 193
Pretty certain they're a standard M10 bolt (17mm spanner size). I think I have M10 x 25mm long ones in there on mine.
 
Mine are bolted up tight with a steel washer under the head of each of them. Not sure if they're supposed to be like that though!
 
If they've been missing a while, you might have to clear the rust out of the threads in the captive nuts before you put bolts in. M10 x 1.5 pitch.
 

Similar threads