Sirus Your all Banned except me Feb 19, 2008 #1 How are you supposed to fit the bolt through the centre of the top bit of your dislocation cone (the disc bit that goes over the top)
How are you supposed to fit the bolt through the centre of the top bit of your dislocation cone (the disc bit that goes over the top)
ThurlowDisco New Member Feb 19, 2008 #2 With alot of swearing. I slide the nut in place using a spanner and screwed the bolt up. It is even more fun if you have rear air con .
With alot of swearing. I slide the nut in place using a spanner and screwed the bolt up. It is even more fun if you have rear air con .
Sirus Your all Banned except me Feb 19, 2008 #3 the bolts supplied must be 3 inch long....how the feck is that supposed to work.....stoopid ****part
ThurlowDisco New Member Feb 19, 2008 #4 The bolts with mine ,at most, were only 2" long , came from Paddocks.
D Dave 2000 Active Member Feb 21, 2008 #5 Mine came from Paddocks with 2" bolt, put bolt in upside down after glueing to cone part. Sorted!! regards Dave
Mine came from Paddocks with 2" bolt, put bolt in upside down after glueing to cone part. Sorted!! regards Dave