Try Wilko they have a nut and blot section
awkwardbob
Well-Known Member
That’s the rascal.
I’ve got hold of some M6 bolts and square nuts to try.
will see how it goes .
Yep looks as described, it's just a lock plate, basically a trap nut, bolts are 6 mm that attach drier.
Last edited:
RangeRoller dt
Well-Sprung Member
You are sure this is the bit you want?
Squirt of oil it be fine
Squirt of oil it be fine
awkwardbob
Well-Known Member
You are sure this is the bit you want?
View attachment 225583
View attachment 225582 View attachment 225584
Squirt of oil it be fine
yes that’s the bit, mine sheared
I’ve currently got my screwed in with a 50mm M6 bolt, an M6 gutter nut and a couple of M8 washers.
Thanks !
awkwardbob
Well-Known Member
Sorry, Not sure what happened there
RangeRoller dt
Well-Sprung Member
Awkward indeed
awkwardbob
Well-Known Member
Will happily reimburse some bear tokens for the ‘right’ bits thoughAwkward indeed
!
RangeRoller dt
Well-Sprung Member
You are welcome to have them if they are any use to you.
You’ve come this far
You’ve come this far
Not sure if this is any help, a little late to the party here! But I had the same issue. I managed to drill out what remained of the bolt from the nut, and save it (lucky, as I never did find anything resembling the square nut whilst searching online. Then I ordered part FB106077 (the bolt). Though in truth I think any M6 bolt and square nut arrangement will most likely keep it secured.
RangeRoller dt
Well-Sprung Member
awkwardbob
Well-Known Member
You and me both buddy
Poor Princess
Hey, I’m genuinely very grateful for your help and I fear my solution s only a ‘temp’ one so I will PM you to arrange - I too feel sorry for your loss...
Have to say, on a brighter note, took her out for a looong drive all within Argyll and Bute and she didn’t miss a beat. Changing those rear bags seems to have sorted the issue (for now !) and it’s a job I can tick off my list !
RangeRoller dt
Well-Sprung Member
I’m only teasing you bud
