M

mark bauermeister

New Member

• Nov 27, 2012

• #1

hi there i have 2 1992 200tdi i need to remove and replace blower motor and matrix from one to another how do i do this?
thanks

 

discool

Well-Known Member

• Nov 27, 2012

• #2

Hope you not asking for a step by step how to as it's a dash out job so get a workshop manual and best of luck.

 

M

mark bauermeister

New Member

• Nov 27, 2012

• #3

discool said:

Hope you not asking for a step by step how to as it's a dash out job so get a workshop manual and best of luck.

Click to expand...

not step by step by were to locate them i have haynes manual but im not familiar with this type of repair i m looking at heating and ventilation sytems am i looking in the correct place?

 

R

ruffday

Active Member

• Nov 27, 2012

• #4

Do a search but its a dash out job and will take the best part of a day.
You wont find a step by step just strip it out its not bad just time consuming.

 

discool

Well-Known Member

• Nov 27, 2012

• #5

Nope it's in Bodywork andfittings 12.21.

 

M

mark bauermeister

New Member

• Nov 27, 2012

• #6

brilliant thanks that helps alot now how do i locate the motor and matrix are they easy to find?

 

discool

Well-Known Member

• Nov 27, 2012

• #7

mark bauermeister said:

brilliant thanks that helps alot now how do i locate the motor and matrix are they easy to find?

Click to expand...

Once you have access to the heater box, yes, but the box has to be removed (unbolted) to gain access to the matrix although the motor will be accessibly with out that.

 

R

ruffday

Active Member

• Nov 27, 2012

• #8

If I remember correctly you need to split the box to get the matrix out.
If you are carefull you can cut a section out of the box and swap the matrix then glue the box back together afterwards.