wangewova · Nov 2, 2013

Good evening all

My usually very reliable (shock) P38 has succumbed to the dreaded blend motor issue. Passenger side only, easy access I believe.

We have a bit of a drive to tomorrow and I don't much fancy the Mrs getting frostbite. As a a quick temporary fix, can I force the flaps/lever into warm on the passenger side until we get the new blend motor?

Thanks in advance

jacckk · Nov 2, 2013

If I remember correctly Saint.V8 did this exact thing at one point when owning his P38.

Heres the thread: Forcing passenger side blend motors to hot

In reality it's easier just to fix it while your there.

Saint.V8 · Nov 3, 2013

jacckk said:
If I remember correctly Saint.V8 did this exact thing at one point when owning his P38.

Heres the thread: Forcing passenger side blend motors to hot

In reality it's easier just to fix it while your there.

Well remembered that was nearly 2 years ago!!

Yes while your in there just fix it properly....i should have and didnt....silly mistake!

wangewova · Nov 3, 2013

Thanks Jacckk and Saint V8. It was really just something i hoped i could do for a few days until i get a replacement blend motor. I agree with you both.

Parisien · Nov 3, 2013

Still...it will last you over the winter........so.....can be excused, plus never warm enough over here to much need air-con

P

wammers · Nov 3, 2013

If you get a fault "Blend motor short circuit" can be as little as carbon dust build up in the motor commutator. Whip it out, take it apart, strip motor, clean rebuild and all is good.

wangewova

New Member

jacckk

Active Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

wangewova

New Member

Parisien

New Member

wammers

No longer with us, RIP

Similar threads