T

tev

New Member
my p38 4.6 hse got a problem when i put my foot on the brakes sometimes the abs light warning light and tracton light comes on but nothing on my display anyone any ideas on this one checked the fuild all is fine there and the brakes are spot on ?:confused:
 
Think I will buck the trend of this thread and add some advice..
My first thoughts are the accumulator failing. This holds a reserve of pressure ready for the traction control to use to apply the brakes when needed. If the pressure is dropping when you are braking normaly, this will kick up the warning you are getting.This is a relativly easy job to do, just make sure you de-pressurise the system first. Check the Rave CD on how to do this.
 
rewmer said:
Think I will buck the trend of this thread and add some advice..
My first thoughts are the accumulator failing. This holds a reserve of pressure ready for the traction control to use to apply the brakes when needed. If the pressure is dropping when you are braking normaly, this will kick up the warning you are getting.This is a relativly easy job to do, just make sure you de-pressurise the system first. Check the Rave CD on how to do this.
Click to expand...
cheers m8 i`ll check it out now;)
 
Other things that cause this is a wheel sensor problem eather wiring bad joint on an earth or connector or wheel sensor needing a little adjustment
 
You must log in or register to reply here.

Similar threads

Z
P38A Random braking problem-sometimes extremely hard brake pedal
Replies
19
Views
922
Datatek
Datatek
R
Brakes having an episode 🤦🏼‍♀️
Replies
10
Views
694
Datatek
Datatek
kricktd5
L332 abs/ HDC
Replies
1
Views
804
Datatek
Datatek
G
RR 55 plate l322 vogue
2
Replies
30
Views
1K
stuu
stuu
F
P38 DSE loss of power when driving
2
Replies
29
Views
1K
RangeRoller dt
RangeRoller dt