meat

New Member
hi was looking to get my facts right before i dismantel anything i dont hav to,was going to take propshaft off freelander 2000 plate,as i heve lound noise comeing from seems back/middle of f/lander,do i have to take the full prop off or just the back bit,and what tools will i need,and how would i kno if my ird is fine,cheers.
 
there are no special tools needed, a good socket set will do the job. you could leave the front, then you don't need to blank off the IRD.:welcome2: google Bell engineering, there is an explaination on there how to check IRD VCU etc.. cos i hate typing.
 
Last edited:
there are no special tools needed, a good socket set will do the job. you could leave the front, then you don't need to blank off the IRD.:welcome2: google Bell engineering, there is an explaination on there how to check IRD VCU etc.. cos i hate typing.

Tw@t!
Why dont you look in the ****in' FAQ section? :mad:
Wots the point of us going to the bother of finding stuff and writing things for members if pratts like you keeps pointing peeps to other sites?
Get of ya fat backside and look for stuff on THIS site. Better still write some more guides!:mad::mad:
 
Tw@t!
Why dont you look in the ****in' FAQ section? :mad:
Wots the point of us going to the bother of finding stuff and writing things for members if pratts like you keeps pointing peeps to other sites?
Get of ya fat backside and look for stuff on THIS site. Better still write some more guides!:mad::mad:
HEY NUGGET,,wit ye talking about pointing peeps te uther sites,am kno own an uther site,and if you think I am, well you must hav been on the site urself ya ****ing NUGGET.
 
there are no special tools needed, a good socket set will do the job. you could leave the front, then you don't need to blank off the IRD.:welcome2: google Bell engineering, there is an explaination on there how to check IRD VCU etc.. cos i hate typing.
thanks mate.
 
:doh: no wonder children don't want to act adults!! Surely this site was set up to help people with landrovers. So far i have seen a lot of people with a lot of experience offering help to others. but you do have your fair share of abusive knuckle scraping illiterate ****ers on here too. Fookin lovin it tho lol.
 
:doh: no wonder children don't want to act adults!! Surely this site was set up to help people with landrovers. So far i have seen a lot of people with a lot of experience offering help to others. but you do have your fair share of abusive knuckle scraping illiterate ****ers on here too. Fookin lovin it tho lol.

Sorts the wheat from the chaff, soon find out who will actively participate.

I've met several people from the site and spent enough time to see that they are more

A fanatic is one who can't change his mind and won't change the subject.
Winston Churchill

Attitude is a little thing that makes a big difference.
Winston Churchill



A joke is a very serious thing.
Winston Churchill


A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.
Winston Churchill



All the great things are simple, and many can be expressed in a single word: freedom, justice, honor, duty, mercy, hope.
Winston Churchill

An appeaser is one who feeds a crocodile, hoping it will eat him last.
Winston Churchill



Continuous effort - not strength or intelligence - is the key to unlocking our potential.
Winston Churchill

[COLOR=Red.]
Criticism may not be agreeable, but it is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things
[/COLOR]
Winston Churchill
 
Last edited:
If you have an important point to make, don't try to be subtle or clever. Use a pile driver. Hit the point once. Then come back and hit it again. Then hit it a third time - a tremendous whack.
Winston Churchill
 
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery.
Winston Churchill
 

Similar threads