RJ092 · Nov 3, 2014

so I've bought myself a Disco and after needing to fix some flaking paint, it went all the way to a full rebuild!

(my wallet hates me now lol)

anyway, I've bought myself the boot floor, arch side panels, inner and outer arches, the 3 under floor supports, BUT i cannot seem to find the part that goes between the boot floor and the Rear x-member! ( the bit where the carpet trim finisher screws into)

anybody can help me out in finding one?

PS: I've also gone as far as designing the Part on CAD and converted to sheet metal in the hopes of getting it made, but after having several places say "sure, we can have a look and get back to you tomorrow" i still have no reply and have kind of started losing hope!

Cheers to anyone for any help!

thebiglad · Nov 3, 2014

RJ092 said:
so I've bought myself a Disco and after needing to fix some flaking paint, it went all the way to a full rebuild! (my wallet hates me now lol)

anyway, I've bought myself the boot floor, arch side panels, inner and outer arches, the 3 under floor supports, BUT i cannot seem to find the part that goes between the boot floor and the Rear x-member! ( the bit where the carpet trim finisher screws into)

anybody can help me out in finding one?

PS: I've also gone as far as designing the Part on CAD and converted to sheet metal in the hopes of getting it made, but after having several places say "sure, we can have a look and get back to you tomorrow" i still have no reply and have kind of started losing hope!

Cheers to anyone for any help!

Have a look here, shows parts and numbers:

RJ092 · Nov 4, 2014

Hi, @thebiglad and thanks for your reply.

I've had a look through and thought it might be no.7, but when I searched for the P/N I noticed it was not it

Thanks for the help Tho! much appreciated

Brian S · Nov 4, 2014

I brought one from billing a few years ago so someone does make them.

Sorry I can't remember the company but ring around as there will be someone doing them.

RJ092 · Nov 7, 2014

i'll continue to have a look round. Hopefully i'll find it soon and crack on with the work!

Cheers for the help tho

Russ81 · Nov 10, 2014

Here you go hope this helps Land Rover Discovery Rear Cross Member Floor Support - YRM Metal Solutions

RJ092 · Nov 11, 2014

Hi and thanks for your reply.

Unfortunately, YRM only do the 'P' shaped section without the end bits, and mine's all rotted out at the ends too

I've attached a pair of images highlighting the end sections as I've drawn them up on Solid-works in my attempt to get someone to manufacture them..

RJ092

Member

thebiglad

Well-Known Member

Attachments

RJ092

Member

Brian S

Well-Known Member

RJ092

Member

Russ81

Member

RJ092

Member

Attachments

Similar threads