landowner Pensioner Pete Full Member Dec 8, 2008 #1 Any one know the size off hand, the ones holding the sticks to the chassis.
Trewey Cockernee, Pasty munchin bastid. Dec 8, 2008 #2 30mm from memory (90% certain) 10% chance they might be 32mm
Tonks4x4 Active Member Dec 8, 2008 #4 They are 100% 30mm Part No: NY120041L 20mm Metric thread nyloc nut.
Tonks4x4 Active Member Dec 8, 2008 #5 Unless they are on a pre 86 range rover and the thread is finer.
landowner Pensioner Pete Full Member Dec 8, 2008 #7 Griffdowg said: eeeeees good in knee! Click to expand... Very good, Mines a pre 86 so it could be british thread and head size rather than metric so a/f...bsf...bsw...whitworth..?
Griffdowg said: eeeeees good in knee! Click to expand... Very good, Mines a pre 86 so it could be british thread and head size rather than metric so a/f...bsf...bsw...whitworth..?
Tonks4x4 Active Member Dec 8, 2008 #8 Then the nut is a 15/16 spanner size Part No: NY610041L 5/8 UNF thread
B boydy1989 Well-Known Member Dec 9, 2008 #9 on my 84 90 they are M20, 30mm across the flat. Metric thread.
