Annietulip

New Member
Does under bonnet insulation work. What is best type / make if it does ?
Any other areas that are relevantly easy and worth doing?

Any advice great fully recd.
 
I would say under bonnet and bulkhead and floor needs to be soundproofed.

Had a look at mine today, don't know what is best to use though, it needs to be some sort of thick stuff though. I once stripped an old BMW and they had used thick rubbery stuff but not dense if you know what I mean, had cavities in it.

Got to be cheap anyway:)
 
Be careful what you use, as if its open cell or material then it will soak up water and cause rust.

Ive found the best method is 3mm - 10mm closed cell foam (water tight) covered in speaker carpet 2/3mm rubber.


Most noise comes from the front bulkhead, a pillars and doors.
 
Does under bonnet insulation work. What is best type / make if it does ?
Any other areas that are relevantly easy and worth doing?

Any advice great fully recd.

That's a strange introduction:rolleyes::rolleyes::rolleyes:
I think I've read of people using the thick rubber stable matting as insulation;);)
 
7ara9ury.jpg
 
I used Dynamat and it worked well. On this inside of the door panels and inside the center console tunnel (automatic).
 

Similar threads