Nig

Nig

Bored Shìtless
Just removed fubared slave cylinder of 300tdi disco N reg
First off ah believe there are a choice of two and ah need gearbox number from underneath is it this one ?

2017-08-15 14.12.07.png



And whats the best quality replacement ?
Looks like rimmers do an oem one fer £28.50 or genuine for £39.50

Paddocks states lockheed oem (ah likes lockheed)
Fer £29.50
http://www.paddockspares.com/ftc5072g-clutch-slave-cylinder-lockheed.html.


20170815_131802.jpg


Nuffer picshure cos ah nose yer nosey feckers on ere likes picshires ;)

Cheers fer any indergestions ;)
 
Nig said:
Just removed fubared slave cylinder of 300tdi disco N reg
First off ah believe there are a choice of two and ah need gearbox number from underneath is it this one ?

View attachment 129474


And whats the best quality replacement ?
Looks like rimmers do an oem one fer £28.50 or genuine for £39.50

Paddocks states lockheed oem (ah likes lockheed)
Fer £29.50
http://www.paddockspares.com/ftc5072g-clutch-slave-cylinder-lockheed.html.


View attachment 129475

Nuffer picshure cos ah nose yer nosey feckers on ere likes picshires ;)

Cheers fer any indergestions ;)
Click to expand...
Love the blue sandwich box Nig !.........very camp :rolleyes::D:D:D:D:D:D
 
  • Like
Reactions: Nig
doodle bug said:
Love the blue sandwich box Nig !.........very camp :rolleyes::D:D:D:D:D:D
Click to expand...
Seen it last week outside a charity shop.
Ah were sick of luggin big cantilever roond and had put some tools in a zip shower bag fingy but a pain int arris ter get tools oot soo that is nice n bijou fer int back :p

neilly said:
Did you miss out on the fragranced baby wipes..............??..........:oops::oops:

Cheers
Click to expand...

Eggsellent fer cleanin yer ands n arms off of grubby oil n sheep shìt off yer cock ;)
 
Fook it. Just ordered the lockheed wun frum Paddocks.
£41.50 ffs wiv the bastid vat n delivery. :(
 
I always buy a few bits and bobs (oil/air/fuel filters for example) to get the order over 50 notes for free postage.
 
  • Like
Reactions: Nig
Flossie said:
Or a couple of boot floors...
You'll deffo need them at some point.
Click to expand...


Get all them from local motor factors. No where near as dear so would of cost more, in fact I should of rang them to see if they sold lockheed cylinder cos I get discount :(

No need for a boot floor, there's no rust on me disco ;)
 
Well the master cylinder is fooked.
Took pipe off and it won't push fluid through.
See if ah kin get a noo one from motor factors on Tuesday since it bank holiday.
Serves me right fer not buyin both as I was advised too :mad::oops::D
 
Nig said:
Well the master cylinder is fooked.
Took pipe off and it won't push fluid through.
See if ah kin get a noo one from motor factors on Tuesday since it bank holiday.
Serves me right fer not buyin both as I was advised too :mad::oops::D
Click to expand...
have you tried using your finger as a one way valve at the pipe hole on master whilst pedals pumped slowly
 
  • Like
Reactions: Nig
You must log in or register to reply here.

Similar threads

Alibro
Clutch change in a TD4 (list of jobs to do)
2
Replies
30
Views
13K
NUM427F
N
bustersbus
  • Locked
Clutch slave cylinder renewal
Replies
0
Views
32K
bustersbus
bustersbus
V
clutch master cylinder and slave(how hard is it to do)
Replies
8
Views
1K
Northern Irelander
Northern Irelander