74jay

New Member

• Mar 3, 2012

• #1

Hi Guys.

Can anyone tell me how many bolts an nuts there on my 200tdi discovery bell housing. Is there any at the top which can't be accessed from underneath if there are how do you remove them can you do it from inside the car?

 

3.5 efi

Well-Known Member

• Mar 3, 2012

• #2

lower the box

 

Pikey

Dummy Ejection Facilitator..

• Mar 3, 2012

• #3

get under the car with a torch and the missus's makeup mirror. there's 3 on the top, all can be reached. by using a couple of extention bars. on a ratchet.

 

Pikey

Dummy Ejection Facilitator..

• Mar 3, 2012

• #4

3.5 efi said:

lower the box

Click to expand...

NO need..

 

3.5 efi

Well-Known Member

• Mar 3, 2012

• #5

redhand said:

NO need..

Click to expand...

am I just talking bollocks again?

 

jamesmartin

Well-Known Member

• Mar 3, 2012

• #6

it is easier to lower the box as far as it will,especially if you have use of engine crane

 

Pikey

Dummy Ejection Facilitator..

• Mar 3, 2012

• #7

3.5 efi said:

am I just talking bollocks again?

Click to expand...

Probably not. it does make it easier to get to em. But I find a couple of 8" bars on a ratchet makes it simple enough to do without having to drop the box down.

 

3.5 efi

Well-Known Member

• Mar 3, 2012

• #8

redhand said:

Probably not. it does make it easier to get to em. But I find a couple of 8" bars on a ratchet makes it simple enough to do without having to drop the box down.

Click to expand...

have done it this way myself, just find it easier to lower the box

 

Pikey

Dummy Ejection Facilitator..

• Mar 3, 2012

• #9

3.5 efi said:

have done it this way myself, just find it easier to lower the box

Click to expand...

If yu take the bottom three bolts out and replace em with x 6" lengths of threaded bar. It makes it a lot easier to remove, and to replace the box later. as everything lines up .

 

ntfs

Member

• Mar 4, 2012

• #10

redhand said:

If yu take the bottom three bolts out and replace em with x 6" lengths of threaded bar. It makes it a lot easier to remove, and to replace the box later. as everything lines up .

Click to expand...

That's a good idea that I wish I had thought of! :doh:
I will remember it for next time - many thanks

 

elsie

Well-Known Member

• Mar 4, 2012

• #11

I never put the top 3 back in !! fooking r380 been out that many times I reckon it should be able to do it without me helping !!

 

74jay

New Member

• Mar 7, 2012

• #12

Good idea don't think I will be either