Irishrover
Well-Known Member
Probably locked itself out. Are you getting "Engine Immobilised" message on the dash ??
Would be cheaper to get your own becm unlocked.
What P38 is it...Petrol or Diesel.
How have you tried to resynch it?
Your location would also be helpful.
Would be cheaper to get your own becm unlocked.
What P38 is it...Petrol or Diesel.
How have you tried to resynch it?
Your location would also be helpful.
Hi im in north cumbria. I had a flat battery and since then its not started
Its a 4.6 1997, no messages on dash, check engine light does not illuminate when turning on the ignition. its at a local specialist he has tried a resync think he has autologic also has another. They won't sync themselves he thinks its the becm wants to send it off for testing and hopefully repair.
basically if the unlocked one just needs plugged in, then I would do it myself to keep costs down.
Its a 4.6 1997, no messages on dash, check engine light does not illuminate when turning on the ignition. its at a local specialist he has tried a resync think he has autologic also has another. They won't sync themselves he thinks its the becm wants to send it off for testing and hopefully repair.
basically if the unlocked one just needs plugged in, then I would do it myself to keep costs down.
Irishrover
Well-Known Member
If you buy an unlocked becm it still has to be programmed to your car and it needs to be the same level as your own...it's probably an "H" level. You need the Check Engine light on to enable it to start. It sounds as though it's armed itself.
Send either Rick the Pick or myself a PM if you are stuck.
Send either Rick the Pick or myself a PM if you are stuck.
Irishrover
Well-Known Member
Thanks for that Des..pleased to be of service.
Basically the Becm had scrambled the VIN and alarmed itself.
:clock:
Basically the Becm had scrambled the VIN and alarmed itself.
:clock:
craig_midz
New Member
my becm is wingin its way to u irishrover compliments of parcel force should be with ya tomorrow
