r Menu REQUESTING/QUITTING THE USER MENU The User menu is requested by pressing the ‘Tone’ button for more than 2 seconds.
After requesting the User menu, the following basic settings can be selected on two planes according to your personal preference. The planes can be accessed by pressing the -> and <- multifunction button. First plane: Gal speed-dependent volume control Tel telephone characteristics (Function NOT enabled) Led LED setting M/S reception optimization setting Nav navigation announcement setting Aux aux input setting Second plane: Cmp compass display setting Bev signal tone volume setting Press the ‘Nav’ button again to quit the user menu.
GAL setting The GAL is a car radio control circuit, which automatically adjusts the car radio volume according to vehicle speed. This results in compensation of the driving noise produced at higher speeds. Request the User menu. Press the ‘Gal’ multifunction button. Using the right rotary control, select between ‘O’ and ‘+7’.
With the GAL setting, the start of volume adjustment can be specified according to vehicle speed. The setting is stored automatically. Explanation: O no volume increase +1 volume is increased at low speed +7 volume is increased at a higher speed
NAVIGATION SYSTEM
TP CD Rad Nav
ICE 1930
NAVIGATION SYSTEM
TP CD Rad Nav
ICE 1931
User Menu
71
LED setting The flashing of the LED (flashes when unit is switched off) can be switched on or off using this function. Request the User menu. By pressing the multifunction button ‘Led’, select either ‘blinking’ (LED on) or ‘off’ (LED off).
The setting is stored automatically.
Setting reception optimization (M/S) Two different reception optimization settings can be selected in order to suppress reception-dependent interference and reflections. Request the User menu. By pressing the multifunction button ‘M/S’, select either ‘Stereo’, ‘Mono’ or ‘Auto’.
Auto: Setting for normal operation - i.e. the system switches from stereo to mono and back, depending upon reception location (provides the optimum setting for almost all reception areas). Stereo: Setting for exceptional reception conditions - i.e. the unit is constantly set to stereo. Mono: Setting for reception conditions in which reflections constantly occur - i.e. the unit is set constantly to mono. The setting is effective immediately and is also retained on switching off.
NAVIGATION
