D

davox

Member
I've just been on the BBS site to purchase Sync Mate. I don't see a way to take up the offer of a 10% discount to Forum members. Has anyone been able to do this?
 
davox said:
I've just been on the BBS site to purchase Sync Mate. I don't see a way to take up the offer of a 10% discount to Forum members. Has anyone been able to do this?
Click to expand...


just pm colin at bbs, he's on this forum and he will explain what to do
 
How exactly do you pm Colin at BBS,because there's several e-mail addresses at BBS or is there a general one or another alternative,cheers
 
I'm thinking about getting one myself. I had a look at the emulator for the Nanocom and not sure if I fully understand it, for example, 'Timing Modulation 94.37' I'm assuming this means the engine timing, but is this figure within tolerance? I'm sure it come with instructions and what read outs should be.
 
Musicmaker said:
I'm thinking about getting one myself. I had a look at the emulator for the Nanocom and not sure if I fully understand it, for example, 'Timing Modulation 94.37' I'm assuming this means the engine timing, but is this figure within tolerance? I'm sure it come with instructions and what read outs should be.
Click to expand...

Timing modulation of 94.37% would mean static timing was retarded. Timing modulation with a warm engine at idle should be 45 to 55%. Ideally 50%. The emulator is just an indication of what systems and things are covered the values shown in many cases are just random entries. For instance the EDC faults read as front right sensor electrical failure, that is nonsensical for the EDC. http://www.nanocom-diagnostics.com/downloads/preview/p38-bosch-edc-nanocom-evolution
 
Last edited:
Musicmaker said:
I'm thinking about getting one myself. I had a look at the emulator for the Nanocom and not sure if I fully understand it, for example, 'Timing Modulation 94.37' I'm assuming this means the engine timing, but is this figure within tolerance? I'm sure it come with instructions and what read outs should be.
Click to expand...

I never risk a long journey without it. Saved my money many times.
 
You must log in or register to reply here.

Similar threads

R
L322 electrics
Replies
5
Views
379
blue beasty
blue beasty
Joss155
P38A 2.5 dse becm syncmate
Replies
17
Views
2K
Joss155
Joss155
Radar1946
P38A Mobile mechanic near Lichfield, Staffs.
Replies
10
Views
351
Rubberknees
Rubberknees
M
2003 Freelander TD4 in Black
Replies
0
Views
190
mudinuri
M
S
Reverse switch wiring
Replies
2
Views
496
Shore968
S