A

alibream

New Member

• Mar 3, 2012

• #1

Hi folks, i have finally got round to ordering a replacement battery tray for my 90 so i am going to paint it, insulate it and install a battery clamp and a kill switch at the same time. Am i best just cutting into the live feed from the battery and adding new terminals to connect to the kill switch? Or replacing the wiring with new? I have a kill switch fitted with a relay so that i can leave the alarm on too. Also any idea where i can get bolts long enough for a battery clamp? Thanks

 

R

Rups

New Member

• Mar 3, 2012

• #2

Love to know this also!

 

Edlen

New Member

• Mar 4, 2012

• #3

The battery tray has slots that take hooked lengths of threaded steel which take the nuts that hold the battery clamp
http://www.lrseries.com/shop/product/listing/7876/3007/1/562953-BATTERY-J-BOLT.html?limit=0

 

Last edited: Mar 4, 2012

A

alibream

New Member

• Mar 4, 2012

• #4

Dont think this would work with the YRM replacment i have seen as i has a flat base?! Thinking of getting a twin battery tray and just fitting one battery.

 

lanny man 90

Well-Known Member

• Mar 4, 2012

• #5

alibream said:

I have a kill switch fitted with a relay so that i can leave the alarm on too.

Click to expand...

any pics of the set up

 

Edlen

New Member

• Mar 4, 2012

• #6

alibream said:

Dont think this would work with the YRM replacment i have seen as i has a flat base?! Thinking of getting a twin battery tray and just fitting one battery.

Click to expand...

Then you will need to drill into the yrm panel to lock it down otherwise your tray will just bounce around.

 

jai_landrover

Well-Known Member

• Mar 4, 2012

• #7

I made my own twin clamp using 3 pieces of threaded rod and some angle simple and cheap and very secure