little6872
New Member
hi dose anybody know if you have to take out the seat box to replace battery box or can you change it with seat box in thanks in advance as someone will know
![[JP]](/data/avatars/m/29/29578.jpg?1437394565){kind=avatar}
Station House
Well-Known Member
May be able to get away with riveting in situ
discomania
Well-Known Member
It's riveted to the underside of the seatbox, so it can be done in situ. You need to take bits and pieces out but it's not a big deal. I had the inner and outer sills off when I did mine.
It was back before the days of YRM metal solutions panels as well, so I went down to the local metal shop with my cutting list and folded and welded up my own version. Then fully fibreglassed the inside as well.
It was back before the days of YRM metal solutions panels as well, so I went down to the local metal shop with my cutting list and folded and welded up my own version. Then fully fibreglassed the inside as well.
discomania
Well-Known Member
I used about 1/2m squared of woven-roving and maybe a few of cups of resin to make it into a fully waterproof batterybox.
The steel was fully seam welded and painted first, then it was laid in on top of that, it also stopped the condensation inside the box which I was pleased about as it will have extra electrical stuff in there some day.
Dave90
Well-Known Member
Cheers, I'm thinking of doing similar, to properly seal it and also as you said help to insulated the body from the cables, thanks again
