Phil_b

New Member

• May 12, 2010

• #1

Hi ppl, I'm off into town later to my local Ag engineers to purchase a
clevis/ball hitch for my disco, bow I realise it's had a 2inch lift so I'm thinking
it'd need a drop plate manufacturing to the same depth but I'd like to know if anyone could measure me the height to the middle of the mounting bolt head on their Standard disco so I can make sure it's correct sorta hieght for my tri axle??
Thanks in advance

 

B

Beast o Bodmin

Banned

• May 12, 2010

• #2

50-60 cm

 

hughesy

Well-Known Member

• May 12, 2010

• #3

We don't know how high the hitch is on your trailer! Isn't the towbar on your disco adjustable, every one I've had has been?

 

Phil_b

New Member

• May 12, 2010

• #4

Cheers,
and yes I realise they're adjustable, the measurement I'm after is to the bottom mounting hole so at least I got an idea of how much 'el disco' has been raised for certain the rest is just trial and error, the trailer height I will find out but it sits comfortably on the ranger in normal setting but seen as the batterys flat and engine fubar'd I can't fire it up to raise the spension

 

L

landy.man

New Member

• May 12, 2010

• #5

Phil_b said:

Hi ppl, I'm off into town later to my local Ag engineers to purchase a
clevis/ball hitch for my disco, bow I realise it's had a 2inch lift so I'm thinking
it'd need a drop plate manufacturing to the same depth but I'd like to know if anyone could measure me the height to the middle of the mounting bolt head on their Standard disco so I can make sure it's correct sorta hieght for my tri axle??
Thanks in advance

Click to expand...

56 cm from bolt head to ground on our unmodified D1 300Tdi

 

L

landrover 110 martin

New Member

• May 28, 2010

• #6

16 inch to top of ball (i believe)