birty1
New Member
Can any one help?
I have a hugh bouncing type vibration on acceleration up to and around 2000rpm. It appears to be from around the nearside front area but as with all Landrovers I cannot be certain.
I have checked and repacked the both bearings on the front axle no different, taken the propshaft off and replaced both joints. At this point there was not play in the transfer box front bearing. If I dip the clutch at speed it stops so its not the CV joint. It definately something retating and out of balance but what ...it sailed through the MOT last week so I can't work out what it is.
Any help would be appreciated.
I have a hugh bouncing type vibration on acceleration up to and around 2000rpm. It appears to be from around the nearside front area but as with all Landrovers I cannot be certain.
I have checked and repacked the both bearings on the front axle no different, taken the propshaft off and replaced both joints. At this point there was not play in the transfer box front bearing. If I dip the clutch at speed it stops so its not the CV joint. It definately something retating and out of balance but what ...it sailed through the MOT last week so I can't work out what it is.
Any help would be appreciated.