JokerUK

Active Member

Full Member

• Aug 4, 2019

• #1

Hi all,
I have a 1987 Land Rover 110 200tdi
I had a brake fluid leak from one of my rear wheels so ordered new wheel cylinder, shoes and springs.
I was 66% successful with the springs and cylinder fitting perfectly but the shoes were too narrow/small.
I got the parts from Rimmer Brothers - the shoes were part number STC2796P which seemed ok as my Vin is ...BA28660
Now I’m confused as to what I should be ordering.

All help gratefully received

Regards

Steve

 

Marmaduke

Well-Known Member

• Aug 4, 2019

• #2

Ring 'em up with your vin number and ask them

 

tottot

Well-Known Member

• Aug 4, 2019

• #3

A problem with any older Landy is that another axle may have replaced the original, keep that in mind if the above does not work.

 

Gmacz

Well-Known Member

• Aug 4, 2019

• #4

Stc2797 is the shoes on the paddock site.
The ones you have are for the 90.

 

Gmacz

Well-Known Member

• Aug 4, 2019

• #5

The 90 rear cylinders will probably fit in the hole as well but you need the 110 cylinders.