The Cowshed

New Member
Going to change the oils in the..

Front and rear axles

Auto box

Transfer box

This weekend.
What tools would i need for this job?

Being a discovery 2 novice all your help is greatly recieved.... :D
 
1/2 inch ratchette .21 mm socket if plastic diff bungs 6" 1/2 extension for t/box filler 5mm and 8mm allen key for auto
 
Strange, I was planning to do my transfer box on my Disco 2 this weekend as well, until mother nature reminded me that I have a leaking sunroof:mad:

Make sure you have a supply of good thread lock / sealant to go round the drain plugs, the transfer box on mine was serviced before I bought it, and now leaks through the drain plug as it wasn't sealed properly with thread lock.... :rolleyes:
 
Think ive got just about everything anyway will ptfe tape be ok for the treads??
Brought a couple of spare diff bungs just incase i have to chisle them off...
So fingers crossed am good to go....
 
undo filler first .does two things one you know you can refill it ,ive had to use 3ft breaker bar to undo some and remove handbrake assembly on others ,two stops it glugging out
 

Similar threads