bustersbus

Well-Known Member

• Apr 11, 2008

• #41

defenderdavie said:

great pics buster ahm a bit more confident aboot mine noo ive got a picture guide
jist one thing though aboot tools how many beers did it require
looking forward to seeing yer pics o the back
im doing mine about a week after yer pics go up

Click to expand...

So when are ye doin' yours Davie?

 

bustersbus

Well-Known Member

• Jun 19, 2008

• #42

It's bin a while since the back axle went in but just got round to sortin' out these pics. After the donor axle came out....

it was time for a clean. Got the degreaser and me pressure washer out and gave it a bit of a blast...

Once it had dried off ah got stuck into it with awire brush, angle grinder, more wire brushes on the drill and some sand paper...

then it was time for the primer...

and paint....

wasn't too sure what ah was goin' to do with the ends, but decided to keep them instead of replacin' them, came up ok in the end...

and this is the axle dryin' in the sun after paintin' the ends...

just a couple of pics of the axle that ah was swappin' it for...

Almost ready to go in....

Ah decided that ah would do the brake lines while ah was at it as well.....

and this is the 'new' axle finally in...

 

landy10

New Member

• Jun 19, 2008

• #43

No matter what you do you always manage to get a can of krony in the pic!













And a few in yersell

 

Madcowz

New Member

• Jun 19, 2008

• #44

Excellent thread with nice big easy to see pictures and description.

If only the Haynes manual was printed like this I wouldn't spend half my life looking at tiny B&W pictures wondering what the hell it is meant to be.

Thanks for doing this for the benefit of others.

mad

 

bustersbus

Well-Known Member

• Jun 20, 2008

• #45

landy10 said:

No matter what you do you always manage to get a can of krony in the pic!

Click to expand...

Ye've got tae watch them buggers! They always jump out when ah'm tryin' tae take a photie!!!

And a few in yersell

Click to expand...

Ohhhhh Aye

 

landy10

New Member

• Jun 20, 2008

• #46

My wife has me movin park benches and alsorts of different things so she dont get them in the picture!
You just dont care enough thas all

 

bustersbus

Well-Known Member

• Jun 20, 2008

• #47

Madcowz said:

Excellent thread with nice big easy to see pictures and description.

If only the Haynes manual was printed like this I wouldn't spend half my life looking at tiny B&W pictures wondering what the hell it is meant to be.

Thanks for doing this for the benefit of others.

mad

Click to expand...

Cheers me dear

Aye, haynes is a pain in the erse 'specially when they stick picks of different things in when all ye want is a piccy of the thing ye're workin' on!!

Ye're welcome

 

bustersbus

Well-Known Member

• Jun 20, 2008

• #48

landy10 said:

You just dont care enough thas all

Click to expand...

Ah know The piccies ain't goin' intae a weddin' album tho'

 

landy10

New Member

• Jun 20, 2008

• #49

naw, there goin on landyzone though much more important, dont want people thinkin they gotta drink krony to work on their landys this lot are bad enough sober!!!!