G

G19RVY

New Member
Just got all the gear to extend my axle breather pipes to the top of the snorkel can anyone tell me were the existing ones go ? cant find the open end can see it dissapear around the bulkhead.

Any help greatly aprreciated.

thanks
 
There's 3 between bulkhead and engine ends curved ove look like waking sticks rear axle one just about 3 foot long just tucked up under body
 
cheers mate

is there just one pipe fitting coming from the front axle ? and were abouts is trhe gearbox breather ?
 
all 3 are grouped together at the back of the engine bay, like he said, walking stick like things. one from front axle, one from transfer and one from gearbox.
 
Finnaly got the out lol couldn't hell find were the gearbox breather was any suggestion were to re route these to the top of the snorkel??
 
I just used the existing pipes for the T/B and G/B a 2-1 connector and a bit more pipe.

I also used a 2-1 for both Axles, and then one final 2-1 just behind the wing so theres only one pipe coming up the snork.
 
Same as tim exstend gb tb I've got mine conexted into to 2 pipes up side of snorkle one pipes 4-1 secend pipes for timing case breather
 
Well ivw got the transfer and gearbox teed straight off with s/steel hose around 6mm air pipe and managed to get both acles to the same point so i now have 2 pipes coming out the dash were abouts is the timing case breather ??
 
G19RVY said:
Well ivw got the transfer and gearbox teed straight off with s/steel hose around 6mm air pipe and managed to get both acles to the same point so i now have 2 pipes coming out the dash were abouts is the timing case breather ??
Click to expand...

it should be on the front but they don't all have one, mine doesn't. you can get a replacement plate with a pushfit connection
 
The one on my rear axle has sheared off!!

Must be some way of getting it out, as the EasyOut has snapped off inside what's left of it ... ??
 
Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it :D

Also anything else i need to do before deep wading ? Cheers
 
G19RVY said:
Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it :D

Also anything else i need to do before deep wading ? Cheers
Click to expand...
Find some water, and don't try the Tyne up by Ryton unless it's a very low tide! :D
 
Wading plugs to the gb and tb ?? Are they the open ports underneath ?

Aye hoping it doent cover the roof derwent river should be alright
 
You must log in or register to reply here.

Similar threads

O
Axle breather & oil query
Replies
6
Views
667
miktdish
miktdish
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
887
Hammer'n'tongs
Hammer'n'tongs
boot-neck59
Front axle cup removal, any ideas?
Replies
5
Views
583
GrumpyGel
GrumpyGel
M
Isle-of-wight please help
Replies
3
Views
637
JohnM70
JohnM70
D
ACE pipe.
Replies
14
Views
827
sierrafery
sierrafery