J

jalmassi

Active Member

• Dec 27, 2007

• #1

Hi there,
Does anyone have instructions on how to install AVM free wheeling hubs ? I cannot get the castellated nuts back on and cannot see how I can run without them for any length of time. The clutch assembly will foul on the castellated nut and be unable to mate with the main body. With the castellated nut removed the assembly fits together......Help please..!!!

 

landynutter

New Member

• Dec 27, 2007

• #2

Do you mean that you can't get a socket on it cause its too tight on space? cos i have to use the old cold chisel and a hammer trick . Just tap it tight .

 

J

jalmassi

Active Member

• Dec 27, 2007

• #3

Thanks for the reply, what is happening is that the castellated nut is too large for the FWH cap to go over.....and I can't imagine running for too long without the nut on.

 

S

slob

Well-Known Member

• Dec 27, 2007

• #4

you got a series 11?

 

J

jalmassi

Active Member

• Dec 28, 2007

• #5

She's a Series III with 24 spline shafts. The main FWH body slots on just dandy but the clutch cover fouls on the castellated nut. Without the nut all is fine...............

 

C

clivees

Well-Known Member

• Dec 28, 2007

• #6

Pic's please

 

J

jalmassi

Active Member

• Dec 28, 2007

• #7

I've just learned that I need smaller castelled nuts to use these hubs, they came with the original kit but I bought these hubs second hand and they weren't included..!!!

thanks to everybody for the help.