currymunster

Well-Known Member
Hi, does anyone know if the fan belt pulley is available and replaceable? Now, I don't mean the actual pulley I mean the bit it bolts to. Four bolt holes and I assume press fitted to the bearing.
Just discovered one of my bolts is loose. On further inspection it is broken. A previous owner had goosed it and 'silly' coned the one bolt in 😞
 
Oooooo. I found this

Very sexy.....
 
1 picture, look inside the hole then you will see what I mean....😞
 

Attachments

  • IMG_20240630_111731608.jpg
    IMG_20240630_111731608.jpg
    167.8 KB · Views: 54
I guess its a question of how sexy does your wallet feel?
Can you weld?
Worth a short with a nut/welder/grinder.

J
 
Try metal weld putty. It says you can drill & tap it..
But it would hold a nut & washer in place for another option,
 
Repair was an option as yes, I can weld and could easily weld a nut to it. My thoughts were balancing, but when I spun I it wobbled. Not like a buckled wheel but like the pulley wasn't central......?
 

Similar threads