Ruby Range

Well-Known Member

• May 18, 2020

• #1

Iv never had this working on my 02 and so when the screen was replaced last week I bought a tested replacement sensor and tried that but still nothing!!. Connections are all made and seem good and the stalk is working on all settings. Fuse is the same for the rear washer and that works so anyone any ideas please!!

 

gold rover

Well-Known Member

• May 18, 2020

• #2

Do your wipers seat correctly? I've found in really strong wind, the wipers don't seat properly on the return, and the auto stops working.

 

marksman

Well-Known Member

Full Member

• May 18, 2020

• #3

Just a thought, how are you turning auto wipe on and off ?

 

Ruby Range

Well-Known Member

• May 18, 2020

• #4

Hopefully marksmen as in the manual move to intermittent and leave there. Tried before turning on ignition and after and neither works

 

Ruby Range

Well-Known Member

• May 18, 2020

• #5

Fault found it is hopefully a broken wire hid amongst the bunch sitting behind the mirror

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• May 18, 2020

• #6

Also, the sensor needs to be calibrated to the window....

It uses a sensor to measure the refraction of the glass...if it changes, there is rain....so it needs to be calibrated to a dry screen on fitment.