Barnview104
Member
Hi all. How hard to swap a gearbox out on a automatic TD4 HSE. ?
Any information much received
Any information much received
Why do you need to change the box? What codes is it giving?Thanks
Re the drive for plate Is that obvious from outside the gearbox or is it internally located
like clutch splines ?
Thanks
Box is busted. Got a spare but never done it on a freelander before.Why do you need to change the box? What codes is it giving?
You access the 4 drive plate bolts through a small aperture between the engine and gearbox bell housing. There's normally a cover to remove, before you see the bolts. You need to rotate the engine to release each bolt in turn, but make sure you mark the position, so you can fit the dive plate back in the same position on the torque converter.
That depends on a number of factors, some being personal to you.Yep. Is it worth the aggravation is my question.