F

flymastergeneral

Member

• Nov 9, 2016

• #1

hi, I need to fix the bottom of my 90's front doors as they have rusted to nothing. A mate of mine sugggested getting some defender door sections and just using tiger seal to fix them to the door rather than weld them in place. Has anybody had any success doing this. It seems a bit too easy to me. Also a bit unsafe.

Cheers

Fgm

 

blue beasty

Leaks an prone to bits dropping off

• Nov 9, 2016

• #2

I think you've answered your own question

 

jamesmartin

Well-Known Member

• Nov 9, 2016

• #3

flymastergeneral said:

hi, I need to fix the bottom of my 90's front doors as they have rusted to nothing. A mate of mine sugggested getting some defender door sections and just using tiger seal to fix them to the door rather than weld them in place. Has anybody had any success doing this. It seems a bit too easy to me. Also a bit unsafe.

Cheers

Fgm

Click to expand...

frame will need welding ,skin to frame doesnt

 

meego

Well-Known Member

• Nov 10, 2016

• #4

Lengths can be bought from YRM solutions.
http://www.yrm-metal-solutions.co.uk/epages/BT4822.sf/en_GB/?ObjectPath=/Shops/BT4822/Products/015
Your mates a cowboy.

 

F

flymastergeneral

Member

• Nov 10, 2016

• #5

Aye he's a cowboy. Welding the frame together is more like it. It's also something I can do. Steel to ally is a bit to tricky for me.

 

blue beasty

Leaks an prone to bits dropping off

• Nov 10, 2016

• #6

The ally skin is bonded to the steel frame

 

F

flymastergeneral

Member

• Nov 10, 2016

• #7

I might risk a few tack welds on the frame to skin, otherwise I'll use chewing gum.

 

blue beasty

Leaks an prone to bits dropping off

• Nov 10, 2016

• #8

flymastergeneral said:

I might risk a few tack welds on the frame to skin, otherwise I'll use chewing gum.

Click to expand...

Are you having a giraffe?

How is melting holes in the ally going to help?

The skin is BONDED and folded around the steel frame

 

F

flymastergeneral

Member

• Nov 10, 2016

• #9

I'm joking of course. I wouldn't really use chewing gum.

 

Hippo

Lord Hippo

• Nov 10, 2016

• #10

flymastergeneral said:

I'm joking of course. I wouldn't really use chewing gum.

Click to expand...

Don't knock it until yer tried it. Lots of peeps in ere use chewing gum to fix doors.

 

meego

Well-Known Member

• Nov 10, 2016

• #11

There is no "Ally" welding required. When you come to cutting out the bottom part of the frame, all will become apparent. If you can cut and weld metal it's an easy job.

 

F

flymastergeneral

Member

• Nov 11, 2016

• #12

meego said:

There is no "Ally" welding required. When you come to cutting out the bottom part of the frame, all will become apparent. If you can cut and weld metal it's an easy job.

Click to expand...

Cheers meego. My welding is iffy at best, so I'll see how I get on.

 

meego

Well-Known Member

• Nov 11, 2016

• #13

flymastergeneral said:

Cheers meego. My welding is iffy at best, so I'll see how I get on.

Click to expand...

No problem mate. I assume you will be using a mig ?? Don't have it set too high and make sure the old part of the frame is cut back to good clean, rust free metal. Take measurements of the door frame before you cut the the old bit out.