Been watching mike a few years as well now, most of his content is very much worth sharing. Fairly sure I picked up on chris higgins vids off of landyzone as well, so it helps to spread the word.
 
oo I like the vortec idea, got a for spares chevy in the garage with the 4.3 v6 wonder if it will fit in the series 3 :D
 
Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike
 
Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike
Mike do you get any defender td5s to work on dear chap, as I only see the 300tdis and 200s in you’re vids?
 
Hi guys!
Mike here!
Thanks for all your kind words
So swing on by and make a request and I will see what I can do

I do not do drama, music, effects or any other gimmicky stuff

I know I am in Canada and limited to the vehicles I can work on, but I try to cover the stuff that is common for all
The Vortec project is on the back burner for a short while, but it will work - waiting for a special adaptor shaft to be made
The Tee shirts have been a real pain - but I am working on something with a chap in the UK

Cheers!
Making your Land Rover better - one at a time!

https://www.youtube.com/channel/UCRssffMP_F8_SCJcqFLq4Ow

Mike

used your clutch master cylinder vid today for pointers on my series 3 :D
 
Used your swivel replacement vid today to swap out the sweeper seal without dismantling the hub. Bloody hell the flange bolts onto the axle were buggers to get off! The tip on using the upturned wheel to stabilise the hub while it was cleaned and the seal swapped was genius. Cheers.
 
Very true, great guy and great vids and as stated no stupid music or anything like that or begging for subscribers on every vid like on some channels, just a shame he doesn’t get td5s there.
 
I enjoyed watching Mike's videos till he had issues with the D3 and its air suspension. Because he ridiculed the Discovery I un-followed! ha ha

Only joking great viewing
 

Similar threads