HiDeeHi

HiDeeHi

Active Member
Events Planner
I've got a 1995 Defender 90
I've removed a bolt that holds the body to the chassis (a 7" mounting bolt) in order to fit a rockslider. It had been put on the wrong way round so had to be totally removed. Trouble is 1 - The bolt I removed is knackered anyway and I need to replace it. Tried local hardware store but no good and no Landy garages open today and 2 - the holes are not aligned properly and I don't know how to align them!
Is anyone local to me that could help?
Coffee and chocolate biscuits will be supplied :)
 
Are yu at home, or stuck on a hillside?

Without being a poo-bah, I don't really think this is a job for LZIR.
 
blue beasty said:
Is this urgent? Which bolt is it you're talking about, size/diameter etc?
Click to expand...

Not urgent in that I'm at home, but obviously can't use Landy as it is.
It's a 7" just over 1/4" diam. I think Demon Tweeks may have one so may be able to get hold of one.
If there was a local that could help that would be great - but no problems if not
 
The Mad Hat Man said:
Are yu at home, or stuck on a hillside?

Without being a poo-bah, I don't really think this is a job for LZIR.
Click to expand...

Fair point -but you can bet your bottom dollar that if I'd posted it anywhere else someone would say "post it on LZIR" :rolleyes:

Feel free to move my post
 
drewster said:
its the bulkhead bolt I think either jack it up or pull it down
Click to expand...

Ah yes that would make sense, a prybar or large screwdriver might be some help to pull into line as well.

Bit of a long shot someone local having one kicking around but you never know
 
CV23 is a bit far for me for a non-urgent... Annoying though as I was just with a very helpful local Landy owner discussing a diff pan repair I'm needing...

Sorry I couldn't help - but on the bright side, at least you're at home! :)
 
StuckInTheWoods said:
CV23 is a bit far for me for a non-urgent... Annoying though as I was just with a very helpful local Landy owner discussing a diff pan repair I'm needing...

Sorry I couldn't help - but on the bright side, at least you're at home! :)
Click to expand...

No probs and thanks for looking. I'll sort it somehow
 
You must log in or register to reply here.

Similar threads

Airgunner
Disco 2 rocker shaft snapped
Replies
9
Views
788
Airgunner
Airgunner
A
Sport Is there anyone who can help me?
Replies
16
Views
1K
1988smithy
1988smithy
I
Help required in the Portsmouth area 110 300tdi defender
2
Replies
24
Views
2K
dag019
dag019
Z
DPF fault code P2456-00
Replies
6
Views
1K
Zebravanman
Z
C
Hybrid. Help identifying sticky locks, worn barrels so i can replace.
Replies
7
Views
631
cljcars
C