I've thought about breaking my P38a. Depends how much it's going to cost to replace timing chain and other bits n bobs
 
I'm in need of all the looms & connectors that plug into the becm.
I'm wearing my rigs out. Need to make a new rig.
Just short lengths or the entire looms? Cost a fortune to post if you want the entire looms, not to mention the time to remove.
 
Hi Keith,

I only need approx 18 inches or so, The longer the better as I like to stagger the joins.

Can you supply these Keith? It certainly would be appreciated.

I bought a set of fleabay a few years back, some were missing, some broken & some were from a petrol model requiring me to use jumpers wires.
 
Hi Keith,

I only need approx 18 inches or so, The longer the better as I like to stagger the joins.

Can you supply these Keith? It certainly would be appreciated.

I bought a set of fleabay a few years back, some were missing, some broken & some were from a petrol model requiring me to use jumpers wires.
The scrapper is a diesel and has a Lo Line BECM, happy to look at cutting off the looms if that is any good to you, I expect postage from France will cost a bit though. Let me know if you want them and if it ever stops raining I will see what I can do.
 
Absolutely. Yes please, Keith.

Postage is ok from France. I send there all the time.

Whatever the cost is, it's covered.

Let me know what I owe you & I'll send you some cash.
 
Absolutely. Yes please, Keith.

Postage is ok from France. I send there all the time.

Whatever the cost is, it's covered.

Let me know what I owe you & I'll send you some cash.
I'll get on it when the rain stops and PM you the postage cost. Postage is no problem it's just the weight will cost a bit. French post is ready for Brexit, the stamps for letters now say "The EU and Royaume Uni":rolleyes::D:D
 
Check out parcels2go, I sent a box, 800x500x500 weighing 30kg. Took 4 days and including insurance cost just shy of 30 quid. I was amazed!
 

Similar threads