Simon Perks

Simon Perks

Active Member
After much searching it seems no one not any of the part suppliers or indeed Ebay have the metal pipes on the SIII that carry the water to and from the heater matrix past the rocker cover gasket.
for the part number train spotters amongst us they are:
594631
594634
To be found under optional extras ( i love the fact that the heater is an option) on this link in S111 part 2 section J
THIS IS THE BEST LINK EVER FOR ALL LANDI PARTS - PERIOD!
http://smithies.co.nz/land_rover/index.htm

However to get to my point... could i not just make the pipes out of normal copper tubing as used in the central heating?

or not?

the house are on order .. i can feel the warmth already...

Simon
 
No reason why not. Used inch and a half copper to pipe up rear radiator on a trialer.
 
Copper pipe works fine. I have several sections of my heater cicuit made from it. It can be tricky to get the right dia for the hoses. If its too small you can cut the end off a yorkshire (solder ring) fitting to get a larger dia. if its too big you can get some adaptor hoses where one end is bigger than the other. I got a pair off e-bay as I had 15mm copper going to a 16mm heater.
 
Copper pipe comes in differing thickness normal domestic is table X , some table Y would be good as its wall thickness is better.
If you solder an olive on outer where hose pushes on it will give you something to clamp too. Table x will probably squash with jubilee clip.
 
Yes no problem.
As above you may find a few size issues hose to pipe,but that easy to take care of:) with the 2 options ^^^
Our 630r has an “original” T piece and it is Yorkshire fittings although it’s painted black I can see it:p
Go for it,you can polish it for a bit of under bonnet bling too:eek: but I guess for you the major benefit would be heat in the cab.:).

J
 
I remember using copper pipe bent to shape with Yorkshire fittings years ago on a mini never had any problems with them, they chrome up well if you want real Bling!:cool:
 
Bobsticle said:
Your going to be so disappointed :p:p:p:D
Click to expand...

Aww thanks Bob ...
I have rebuilt the fan and re seated al the air hoses so now we have right hurricane in the cab & as I use Evans coolant i'm kinda hopeful that i will get some improvement.
Next job is to flush out the matrix ( but i have to go mix some dodgy band for a new years eve gig so it's going to have to wait )

Simon
 
You must log in or register to reply here.

Similar threads

R
Series 2 heater box replacement?
Replies
10
Views
2K
Bobsticle
Bobsticle