anubis757

Active Member

• Dec 2, 2020

• #1

Hello
I have been killing my head how to fix this.
Looks easy but its not because the pivot that goes in side the door moves so it can be a just pin...
Did anybody had this broken and fix it?
Many Thanks

 

Attachments

• 
  20201202_123925.jpg

  251.5 KB · Views: 207
• 
  20201202_123933.jpg

  214.1 KB · Views: 193

Nodge68

Well-Known Member

• Dec 2, 2020

• #2

anubis757 said:

Did anybody had this broken and fix it?

Click to expand...

CA glue or 2 part epoxy.

 

jedi

Well-Known Member

• Dec 2, 2020

• #3

Hot glue a suitable door clip in its place..

 

kernowsvenski

Well-Known Member

• Dec 2, 2020

• #4

I had to fix mine back a while ago. I used silicone adhesive

 

deangermouse

Active Member

• Dec 9, 2020

• #5

I glued a small piece of 6mm air pipe in place, used a round flat head self tapper and then glued the securing plastic piece onto the screw, glue gun on the securing plastic bit that goes into the door frame allows it to move a little
hope that helps

 

A

Avocet1

Well-Known Member

• Dec 10, 2020

• #6

I'd be looking for one off a scrapper. I've never had that much luck glueing plastic trims.

 

anubis757

Active Member

• Dec 10, 2020

• #7

FIXED!!!!
I used a wall anchor and glued one of trim pieces (right) I also reinforced the other one with some hot glue...ITS BACK IN THE CAR
Many Thanks My Friends

 

Attachments

• 
  20201205_154754.jpg

  433.7 KB · Views: 110