Hello chaps, im new on here spoke to quite a few people recently regarding the removal of the anti roll bar to the rear of my disco.
I have been told that if i keep the suspension height the same removal will be ok and will allow more articulation whilst off road, but if i raise the height by 2 " this will make the vehicle unstable and dangerous even when off road.
And another enthusiast has said pretty much the opposite, bit confused now can anybody shed any light on this subject, would really be grateful.

with a 2 inch lift and removing the rear anti roll bar it wil be fine, i dont have one and although i havnt got my lift kit on yet many of my disco/rrc driving mates have and they say its fine

Hi
I got 3 inch lift on disco took off rear anti roll bar and had no proplems at all i carry lot tools in back as i us it daily for work on farm no problem at all i put her on the weighbridge and she goes on at 2450kgs!

Cat 95

i removed both ARB's have 2 inch sus AND a 2 inch body lift (4 inch then )

AND i have a roof full of stuff, spare wheel hi lift jack wheel chocks etc



you know what yes it leans under hard cornering but it stays on it's wheels just have to be a smooth driver


any lifted off roader is worse on side slopes